Densification is one of the urban visions for sustainable development - a vision that has become a part of the solution to the unsustainable sake dilemma. With the dense city land will be saved, energy consumption reduced and social cohesion improved. The dense city is considered to be ecologically, economically and socially sustainable. Applying an urban design concept has thus proven to be problematic. Density has been found to be a complex concept which is far more complicated than measuring how much built surface that needs to be covered. It is also not disputed what different degrees of densification mean and whether densification in itself is sustainable.

To succeed, and make money at your animal production you need to feed your animals with high quality fodder. Other condition to succeed is that you keep your production costs at a minimum. To be able to produce baled silage at a low cost it?s very important that the bales have a High density. Density is measured in kg dry matter (DM) per cubic meter. The purpose with this report was to learn more about making silage in round bales and to how much the bale density varies between different brands of round balers.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

The wide distribution range of our boreal pine (Pinus sylvestris L.) provides a great variation in growing conditions and climate/weather factors that influence the wood development of the trees. A great number of extensive studies have been conducted over the years in order to clarify growth trends of this and other species over more or less wide-ranging areas. In this thesis effects of weather factors were instead compared between different forest stands from the about same geographical location. The effects of precipitation, temperature and frost on the year ring characteristics of pine were studied in the research forest of Svartberget Vindeln, in northern Sweden. The stands differed in site index and silvicultural treatment; fertile ? high stem density, fertile ? low stem density, poor ? high stem density and poor ? low stem density.

The purpose of this report was to investigate to which extent local presence of large herbivore mammals (Alces alces, Cervus elaphus, Capreolus capreolus, Dama dama and Sus scrofa) covaries with small rodents (Myodes glaerolus, Apodemus flavicollis and Apodemus sylvaticus? The hypothesis was that high abundance of wild ungulates would inhibit the density of small forest rodents. The data was collected during field work within FoMA (Environmental Monitoring Assessment)/SLU (Swedish University of Agricultural Science). The Ungulate dropping inventory and rodent trappings, which is the base in this report, where performed 2012 ? 2014 in Gnesta/Nyköping municipalities (G/N) with a relatively High density of wild ungulates and Vetlanda/Växjö municipalities (V/V) with relatively lower wild ungulate density.

Approximately 4000-5000 hectares, of SCA´s forest land area in Västerbotten, are in need of pre-commercial thinning (PCT) every year. Within the management district, the areas annually treated with PCT must increase, in order to decrease the area with an urgent need for PCT. This can be done by employing more forest workers or entrepreneurs, by mechanized PCT or by an extended season for PCT. Positive experiences from a private forest owner, who started to carry out PCT when the first snow came and then continued for several months, gave an idea to investigate the possibilities to prolong the season of PCT. The purpose of this experiment was to compare PCT carried out when there was snow on the ground with PCT performed when there was no snow on the ground.

Sweden is considered to have one of the world's highest animal welfare standards in agriculture. Despite this, there are shortcomings in animal husbandry. One example is overcrowding, which is a way to increase stock size without making costly investments in the buildings. It can be carried out systematically to increase profitability or due to, for example uneven calving during the year. The European Commission criticizes the fact that stocking density is not controlled under Swedish welfare inspections.

Sweden is considered to have one of the world's highest animal welfare standards in agriculture. Despite this, there are shortcomings in animal husbandry. One example is overcrowding, which is a way to increase stock size without making costly investments in the buildings. It can be carried out systematically to increase profitability or due to, for example uneven calving during the year. The European Commission criticizes the fact that stocking density is not controlled under Swedish welfare inspections.

Wheat yield depends on the number of ears per m2, the number of kernels per ear and the kernel weight. By knowing the ability of different cultivars to compensate for the different yield components and knowing which yield component that is the most important for the final yield, the farmer can match the cultivar and management to the location. The objective of the study was to investigate how the yield components of winter wheat vary depending on genotype, environment, sowing density and date of sowing.Seven varieties were grown in four locations in Sweden with three different sowing densities and with an early and a late sowing date. On each experimental site, the surviving plants after winter were counted, as well as the number of shoots at early and late spring and the number of ears. Ten ears from each site were cut at three different occasions, starting from the time of blooming, with 200 day degrees between each cut.

Heartwood has always been a desirable part of the tree, due to it?s superior decay qualities com-pared to the sapwood. How the formation of heartwood works has been known for a long time, but which factors that initiates and stimulates the production are poorly understood. This case study presents the results of a study in which silvicultural treatments and site properties had a key position as factors to the formation of heartwood. According to the hypothesis the amount of sapwood is directly controlled by the size of the crown.

The purpose of this study was to investigate the effect of educational and vocational guidance, refer-only high school students tend to stay on their first selected program or to change the program. The theories used in the study deals with young people's choices and choosing education and vocational and life role as a student. The method was quantitative, descriptive survey. High school students in grades three, from two high schools, were asked to answer a questionnaire about perceived educational and vocational guidance. Convenience sample consisted of 162 respondents (N = 162), 86 women and 76 men.

This pre-study investigates the possibility of U-value measurements through an acoustic method. A hypothesis about an acoustic model built on acoustic theories combined with U-value theories is presented to answer the questions: ? Can U-value theory be combined with acoustic theories? ? Can the coefficient of heat be affirmed trough an acoustic measurement? The idea for this dissertation begun with a logical idea in mathematical similarity, between the coefficient of heat transmission units and sound intensity units. The U-value theory is based on assumptions such as initial resistance for inner walls and initial resistance for outer walls. The resistance in the material is interpreted through sound intensity theory. The argument is built upon mass law theory, which means if the frequency or thickness of the material layer doubles it implies an increase of sound reduction by 6 dB.

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

ABSTRACTToday's modern technological society is constantly evolving and house planning is one area that is constantly creating new technical solutions. By looking back at selected architectural eras during the 1900?s, the idea is to study and analyse three building structures in Gothenburg with a focus on quality and content in the urban space.In order to provide a background for the three selected areas, their history has been studied. The main question for the research is: how do different building structures affect the content and qualities in the urban space?The areas have been selected to represent three typical epochs in Swedish building history.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.